Ch 0111 / 22
Step 01.11 — Snug the top square¶
Step 11 of 22 · Chapter 01 — Frame
Tap to enlarge
Parts: none.
Do: Snug the 8 top bolts through their access holes, again in a diagonal pattern. Then go back over all 16 joints once at snug.
Check
All 16 joints are snug. The cube stands on its own and does not rack under a light hand push.
What you're looking at
Manual p.17 shows the completed 2020 cube, all sixteen blind joints engaged. The second pass over every joint matters because the frame settles as it is assembled and the joints you snugged first are no longer snug.
Source: Voron manual p.17