Plate board

The 22 plates of the ASA run in run order, then the five PETG V0 plates of B11 (the bay ducting, outside the run's 157.0 h), one tile each: hours, grams, filament, whether it is a day plate or an overnight one, the spool it comes off and what should be left on that spool afterwards. Tap Printed when it leaves the bed and Sorted once the parts are in their bins. The first plate you have not printed is marked next, and the header keeps the running count, the hours still to go and the spool you should have loaded.

Ticks are per device, in this browser, and separate from the step ticks in the Build tab. The numbers are the ones in print/README and slicer/estimates.csv; the diagram behind each thumbnail is the same one the batch chapter shows at its Load step. All the diagrams on one page: plate plans.

The board needs JavaScript. Without it, the same plates and their bins are on the plate plans page, and the run schedule and spool ledger are in print/README.