Batch B10 — Clicky-Clack door¶
Start the chapter · Resume · Read the whole chapter on one page
Gather per session — what to lay out before each bench segment.
- Steps B10.1–B10.4 · ~5 min — 6 files, 8 objects — 5.7 h, 76 g (PrusaSlicer 2.9.6 estimate) ·
Handle-Hinge_Bottom, no brim — from bin 11-door ·Handle-Hinge_Top, no brim — from bin 11-door ·Hinge-L-sleeve-2X, 5 mm brim already in the project ×2 — from bin 11-door ·Hinge-L-solid-2X, 5 mm brim ×2 — from bin 11-door ·Latch, 5 mm brim — from bin 11-door ·Panel_Clip, no brim — from bin 11-door - Step B10.5 · ~10 min — nothing to lay out
- Step B10.6 · ~10 min — nothing to lay out