Step 04.38 — Bag, label and hand off to Ch 05¶
Step 38 of 38 with a helper · Chapter 04 — A/B drive units and front idlers
Tap to enlarge
Gather for this segment — step 04.38 (~15 min)
Tools and consumables
- four bags
- marker
Already on the bench
- the four finished assemblies
Parts:
- the four finished assemblies · already on the bench
- four bags · consumable
- marker · tool
Do: Bag each assembly separately with its destination written on the bag: A drive: rear right, B drive: rear left, A idler: front right, B idler: front left.
Check
Four bags, four labels, no loose bearings or spacers left on the bench. Leftovers mean a stack is short.
Helper Writes A and B on the two bags and seals the leftover fasteners.
What you're looking at
Manual p.81 is a divider page with no assembly content. On the bench: four finished sub-assemblies, each of which only fits one corner of the machine, so each goes into a bag with its destination written on it.
Good stopping point · ~15 min since the last one
all four assemblies bagged and labelled with their destinations, and nothing left over on the bench. Work through Checkpoint 04 before Ch 05.
Source: Voron manual p.81