Ch 048 / 38
Step 04.8 — A idler: cap the stack with the upper frame¶
Step 8 of 38 · Chapter 04 — A/B drive units and front idlers
Tap to enlarge
Parts:
-
front_idler_right_upper×1 · bin 04-A
Do: Lower front_idler_right_upper over the stack so its nose captures the top spacer and the two frames meet along their mating faces.
Check
The two frames sit tight with no gap and no rock. A gap means a spacer or bearing is out of place.
What you're looking at
Manual p.65: front_idler_right_upper, the 12.0 mm-tall cap. It captures the top spacer and closes the frame around the bearing pair; the two halves meeting with no gap proves nothing inside is out of place.
Source: Voron manual p.65 · Video: Part 3 @1:06:14