Skip to content
Batch B026 / 9

Step B02.6 — Load plate B02-P3

Step 6 of 9 with a helper · Batch B02 — Accent parts (blue)

gather Gather for this segment — steps B02.6–B02.7 (~5 min)

Printed parts

  • the remaining accent parts, [a]_belt_tensioner_a ×2 — from bin 02-Z0, 02-Z2
  • [a]_belt_tensioner_b ×2 — from bin 02-Z1, 02-Z3
  • [a]_z_tensioner_9mm ×4 — from bin 02-Z0, 02-Z1, 02-Z2, 02-Z3
  • [a]_z_chain_retainer_bracket ×2 — from bin 10-chains
  • [a]_endstop_pod_D2F_switch — from bin 05-XY
  • [a]_xy_joint_cable_bridge_2hole — from bin 05-XY
  • XY_cable_chain_bridge-Igus-3mm_backer — from bin 05-XY
  • [a]_z_belt_clip_lower ×4 — from bin 06-Z-joints
  • [a]_z_belt_clip_upper ×4 — from bin 05-XY
  • [a]_guidler_a — from bin 08-CW2
  • [a]_guidler_b — from bin 08-CW2
  • [a]_latch — from bin 08-CW2
  • [a]_latch_shuttle — from bin 08-CW2
  • [a]_pcb_spacer — from bin spare-alt
  • [a]_keystone_blank_insert ×2 — from bin 11-skirts
  • ldo_bestagon_insert — 7.6 h, 96 g (PrusaSlicer 2.9.6 estimate) — from bin 11-skirts

Parts:

  • the remaining accent parts, [a]_belt_tensioner_a ×2
  • [a]_belt_tensioner_b ×2
  • [a]_z_tensioner_9mm ×4
  • [a]_z_chain_retainer_bracket ×2
  • [a]_endstop_pod_D2F_switch
  • [a]_xy_joint_cable_bridge_2hole
  • XY_cable_chain_bridge-Igus-3mm_backer
  • [a]_z_belt_clip_lower ×4
  • [a]_z_belt_clip_upper ×4
  • [a]_guidler_a
  • [a]_guidler_b
  • [a]_latch
  • [a]_latch_shuttle
  • [a]_pcb_spacer
  • [a]_keystone_blank_insert ×2
  • ldo_bestagon_insert — 7.6 h, 96 g (PrusaSlicer 2.9.6 estimate)

Do:

  1. Open slicer/plates/B02-P3.3mf with File → Open Project. Do not rebuild the plate.
  2. Confirm: 16 files, 29 objects, no brim.
  3. In preview, if XY_cable_chain_bridge-Igus-3mm_backer stands 44 mm tall, lay it flat to match the stock bridge.

check Check

Cable-chain bridge sitting flat, not standing, before slicing.

helperHelper Counts the parts on the sorting diagram and checks the total against the object count.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B02.9.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · print plan §6 — conditional / verify items

← PreviousStep B02.5 — Print plate B02-P2

Next →Step B02.7 — Print plate B02-P3