Step B09.6 — Load plate B09-P3¶
Step 6 of 13 with a helper · Batch B09 — Panels, filtration, spool
Gather for this segment — steps B09.6–B09.7 (~5 min)
Hardware
- 5 files, 7 objects — 3.9 h, 55 g (PrusaSlicer 2.9.6 estimate)
Printed parts
exhaust_filter_grill, 3 mm brim already in the project — from bin 11-finishspool_holder, no brim — from bin 11-spoolbowden_retainer, no brim — from bin 11-spoolz_belt_cover_a, no brim ×2 — from bin 11-panelsz_belt_cover_b, no brim ×2 — from bin 11-panels
Parts:
-
exhaust_filter_grill, 3 mm brim already in the project -
spool_holder, no brim -
bowden_retainer, no brim -
z_belt_cover_a×2, no brim -
z_belt_cover_b×2, no brim - 5 files, 7 objects — 3.9 h, 55 g (PrusaSlicer 2.9.6 estimate)
Do: Open slicer/plates/B09-P3.3mf with File → Open Project. The arrangement, brims and overrides
are already in it. Confirm it loaded as described rather than rebuilding it.
Check
No face re-orientation; brim outline on the grill only.
Helper Reads the sorting diagram legend aloud and counts the parts on it while you load.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B09.13.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · LDO Rev D printed-parts guide