Skip to content
Batch B098 / 13

Step B09.8 — Load plate B09-P4

Step 8 of 13 with a helper · Batch B09 — Panels, filtration, spool

gather Gather for this segment — steps B09.8–B09.9 (~5 min)

Hardware

  • 4 files, 21 pieces — 4.2 h, 56 g (PrusaSlicer 2.9.6 estimate)
  • no brim in the project

Printed parts

  • corner_panel_clip_4mm ×8 — from bin 11-clips-4mm
  • midspan_panel_clip_4mm ×7 — from bin 11-clips-4mm
  • bottom_panel_hinge ×2 — from bin 11-panels
  • bottom_panel_clip ×4 — from bin 11-panels

Parts:

  • corner_panel_clip_4mm ×8
  • midspan_panel_clip_4mm ×7
  • bottom_panel_hinge ×2
  • bottom_panel_clip ×4
  • 4 files, 21 pieces — 4.2 h, 56 g (PrusaSlicer 2.9.6 estimate)
  • no brim in the project

Do: Open slicer/plates/B09-P4.3mf with File → Open Project. The arrangement, brims and overrides are already in it. Confirm it loaded as described rather than rebuilding it.

check Check

Counts match: 8 corner, 7 midspan, 2 hinge, 4 bottom clips; no brim outline anywhere.

helperHelper Counts the parts on the sorting diagram and checks the total against the object count.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B09.13.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · print plan §6 — conditional / verify items

← PreviousStep B09.7 — Print plate B09-P3

Next →Step B09.9 — Print plate B09-P4