Skip to content
Ch 0415 / 38

Step 04.15 — B idler: cap the stack with the upper frame

Step 15 of 38 · Chapter 04 — A/B drive units and front idlers

Full page

Tap to enlarge

Parts:

  • front_idler_left_upper ×1 · bin 04-B

Do: Lower front_idler_left_upper over the stack until the two frames meet.

check Check

Frames flush, no gap, no rock.

What you're looking at

Manual p.69: front_idler_left_upper, the tall one at 21.6 mm where the A idler's upper was short. The uppers are handed the opposite way to the lowers, so two that look alike means two of the same hand.

Source: Voron manual p.69

← PreviousStep 04.14 — B idler: build the bearing stack

Next →Step 04.16 — B idler: pull the aid bolt and slide in the tension arm