Ch 0435 / 38
Step 04.35 — B drive: offer the motor up with the cable exit inboard¶
Step 35 of 38 with a helper · Chapter 04 — A/B drive units and front idlers
Tap to enlarge
Parts:
- the B motor with its pulley · already on the bench
Do: Turn the assembly the right way up and fit the motor with the cable exit facing inboard, mirrored from the A drive, so with B at the rear left its cable also runs toward the machine's centreline.
Check
Hold both drives in their build positions: the two cable exits face each other. That is the manual's own test.
Helper Holds the A drive in its rear-right position while you hold B beside it.
What you're looking at
Manual p.79: the B motor going in with its cable exit inboard, mirrored from the A drive. Held in their finished positions the two drives' cables face each other across the back of the machine.
Source: Voron manual p.79 · Video: Part 3 @1:16:29