Ch 0436 / 38

Step 04.36 — B drive: three M3×30 SHCS through the frames into the motor

Step 36 of 38 · Chapter 04 — A/B drive units and front idlers

Full page

Tap to enlarge

Parts:

• 3× M3×30 SHCS · Fasteners, Tools & Misc box

Do: Start all three by hand through both frames into the motor, then tighten evenly.

Check

Three bolts, motor face flat against the frame, nothing cross-threaded.

What you're looking at

Manual p.80: the same three M3×30 through both frames into the motor face.

Source: Voron manual p.80

← PreviousStep 04.35 — B drive: offer the motor up with the cable exit inboard

Next →Step 04.37 — B drive: check your work and the belt path