Step 08.34 — Prepare the 5015 part-cooling blower¶
Step 34 of 65 · Chapter 08 — Toolhead: Stealthburner, Clockwork 2, Revo HF, Nitehawk-SB V2
Tap to enlarge
Parts:
- 50×50×15 centrifugal fan, 24 V ×1 · set out now, fitted later
- flush cutters · tool
- small flat file · tool
Do: Remove the front cover of the 5015. Clip the stock mounting ears off flush and file the remains until the housing sides are flat. A trimming jig STL ships in the Stealthburner release archive, not in the repo's STLs/ tree.
Check
No ear stands proud of the housing wall. The fan drops into the SB main body pocket without spreading the printed walls.
What you're looking at
The 5015 is the part-cooling blower: a centrifugal fan that throws air sideways out of a nozzle rather than straight through, which lets it feed the printhead's narrow ducts. Its moulded mounting ears belong to a different machine; Stealthburner grips the bare housing.
Source: SB manual p.55 · Video: Part 6 @0:20:10