Step 10.70 — Tag every cable at the board end¶
Step 70 of 80 with a helper · Chapter 10 — Wiring and Checkpoint #1
(no image — see text)
Parts:
- cable tags, for whatever is missing · consumable
Do: Walk every cable that reaches the Leviathan, the PSU, the SSR or the USB adapter and read its tag aloud: what it is, where its far end goes. Tag anything that has none.
Check
You could disconnect the whole board and put it back tomorrow from the tags alone.
Helper Reads every tag aloud and says where its far end goes.
What you're looking at
The same cable tags as step 10.40. Every cable should already carry one from the step that landed it; this is the walk that finds the ones you missed. The tags are the only documentation of a Rev D+ bay that will ever exist.
Source: LDO wiring guide § Finish line