Step B00.6 — Sort into bins¶
Step 8 of 9 · Batch B00 — Calibration & jigs
(no image — see text)
Do:
- Sort every part except the three Gate B coupons into its bin off the diagram above.
- Mark plate id and date on a hidden face.
- Bag the three Gate B coupons at the front of 00-jigs:
GATE B — bore and inserts now, rail on kit day.
Check
Bins 00-jigs and 02-Z0 are labelled, every other part is in 00-jigs, and the Gate B bag is closed.
B00-P1 — bin labels print from the bin-labels sheet.
| bin | parts off this plate |
|---|---|
| 00-jigs — Jigs and coupons | Voron_Design_Cube_v7, Heatset_Practice, MGN12_rail_guide ×2, MGN9_rail_guide ×2, pulley_jig |
02-Z0 — Z0 corner (front-left, _a hand) |
z_drive_retainer_a, after Step B00.7 |
Tip
after Gate B the retainer moves to 02-Z0; the cube stays as the reference coupon.
Good stopping point · ~10 min since the last one
plate sorted into 00-jigs, 02-Z0 labelled, the GATE B bag closed and marked. Step B00.7 is next, on the caliper and the KADRICK inserts; its bearing and rail rows wait for the kit.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins