Skip to content
Batch B011 / 8

Step B01.1 — Filament prep

Step 1 of 8 · Batch B01 — Z drive assemblies

(no image — see text)

gather Gather for this segment — steps B01.1–B01.4 (~5 min)

Printed parts

  • z_drive_main_a ×2 — from bin 02-Z0, 02-Z2
  • z_drive_main_b ×2 — from bin 02-Z1, 02-Z3
  • z_drive_retainer_a ×1 — from bin 02-Z0, 02-Z2
  • z_drive_retainer_b — 15.2 h, 201 g (PrusaSlicer 2.9.6 estimate) ×2 — from bin 02-Z1, 02-Z3

Do:

  1. Confirm the Galaxy Black spool is loaded and dried within the last 2 weeks, or fresh.
  2. Spool #1 came off B00 with 748 g by the ledger. This batch alone is 301 g.

check Check

B01-P1 needs ≥ 201 g on the spool at start; the README ledger has spool #1 at 748 g.

tip Tip

A kitchen scale, if you own one, turns the ledger into a check. It is optional; the ledger works from the slicer grams.

Source: print plan §4.3 — spool changes · 00-slicer-setup § Drying · Prusa KB — ASA

← PreviousBatch B01 — before you start

Next →Step B01.2 — Load plate B01-P1