Skip to content
Batch B024 / 9

Step B02.4 — Load plate B02-P2

Step 4 of 9 with a helper · Batch B02 — Accent parts (blue)

gather Gather for this segment — steps B02.4–B02.5 (~5 min)

Printed parts

  • Handle — from bin 11-door
  • [a]_fan_grill_a ×2 — from bin 11-fans
  • [a]_fan_grill_b ×2 — from bin 11-fans
  • [a]_fan_grill_retainer ×2 — from bin 11-fans
  • [a]_belt_guard_a ×2 — from bin 11-fans
  • [a]_belt_guard_b ×2 — from bin 11-fans
  • [a]_tensioner_left — from bin 04-B
  • [a]_tensioner_right — 7.3 h, 93 g (PrusaSlicer 2.9.6 estimate) — from bin 04-A

Parts:

  • Handle
  • [a]_fan_grill_a ×2
  • [a]_fan_grill_b ×2
  • [a]_fan_grill_retainer ×2
  • [a]_belt_guard_a ×2
  • [a]_belt_guard_b ×2
  • [a]_tensioner_left
  • [a]_tensioner_right — 7.3 h, 93 g (PrusaSlicer 2.9.6 estimate)

Do:

  1. Open slicer/plates/B02-P2.3mf with File → Open Project. Do not rebuild the plate.
  2. Confirm: 8 files, 13 objects, the 5 mm brim on Handle already in the project.
  3. Never add a brim by hand or touch the global brim setting.

check Check

The preview shows the brim outline on Handle only, none on the flat fan grills, retainers, belt guards or tensioners.

helperHelper Names the bin colour of each part on the sorting diagram while you open the project.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B02.9.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim

← PreviousStep B02.3 — Print plate B02-P1

Next →Step B02.5 — Print plate B02-P2