Batch B035 / 5
Step B03.5 — Sort into bins¶
Step 5 of 5 with a helper · Batch B03 — A/B drive units + front idlers
(no image — see text)
Do:
- Sort the plate off its diagram: number to legend, colour to bin, bin id on the part.
- Mark plate id and date on a hidden face.
- A is the right-hand side, B the left.
Check
04-A and 04-B each hold one drive-frame pair, one idler pair and one blue tensioner.
Helper Writes the bin id and the date on the inside face of each part.
B03-P1
| bin | parts off this plate |
|---|---|
| 04-A — A drive unit + A (right) front idler | a_drive_frame_lower, a_drive_frame_upper, front_idler_right_lower, front_idler_right_upper |
| 04-B — B drive unit + B (left) front idler | b_drive_frame_lower, b_drive_frame_upper, front_idler_left_lower, front_idler_left_upper |
Tip
the blue [a]_tensioner_right and [a]_tensioner_left from B02 are already in these two bins. Print bin labels from the bin-labels sheet.
Good stopping point · ~10 min since the last one
both bins sorted and labelled, A-side and B-side parts kept apart. Nothing is pressed or bolted; Ch 04 builds from the bins.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins