Step B04.2 — Load plate B04-P1¶
Step 2 of 6 with a helper · Batch B04 — XY joints + X carriage
Parts:
- all seven — 8.6 h, 117 g (PrusaSlicer 2.9.6 estimate)
-
xy_joint_left_lower_MGN12 -
xy_joint_left_upper_MGN12 -
xy_joint_right_lower_MGN12 -
xy_joint_right_upper_MGN12 -
x_frame_V2TR_MGN12_left -
x_frame_V2TR_MGN12_right -
probe_retainer_bracket
Do: Open slicer/plates/B04-P1.3mf with File → Open Project. Arrangement, per-object brims and overrides are already in the project, so confirm it loaded rather than rebuild it. No rotation, no brim: the preview shows no brim outline.
Check
The plate holds x_frame_V2TR_MGN12_left/right, not the superseded Superceded_Parts/MGN9_X/x_carriage_frame_*_MGN9 files.
Helper Counts the parts on the sorting diagram and checks the total against the object count.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B04.6.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · print plan §6 — conditional / verify items