Batch B044 / 6
Step B04.4 — Print¶
Step 4 of 6 · Batch B04 — XY joints + X carriage
(no image — see text)
Do: Print with standing overrides.
Check
First layer clean on both XY joint lowers, the largest parts on the plate.
Tip
Paused or stopped mid-plate? See When the printer stops.
Good stopping point · ~5 min since the last one
plate started; nothing to do until it finishes.
Source: 00-slicer-setup § Overrides · print plan §4.1 — how these numbers were produced