Skip to content
Batch B084 / 11

Step B08.4 — Load plate B08-P2

Step 4 of 11 with a helper · Batch B08 — Skirts and front modules

gather Gather for this segment — steps B08.4–B08.5 (~5 min)

Hardware

  • 3 mm brim on all three, already in the project

Printed parts

  • front_skirt_a_350 — from bin 11-skirts
  • front_skirt_b_350 — from bin 11-skirts
  • side_skirt_a_350 — 8.4 h, 108 g (PrusaSlicer 2.9.6 estimate) ×1 — from bin 11-skirts

Parts:

  • front_skirt_a_350
  • front_skirt_b_350
  • side_skirt_a_350 ×1 — 8.4 h, 108 g (PrusaSlicer 2.9.6 estimate)
  • 3 mm brim on all three, already in the project

Do: Open slicer/plates/B08-P2.3mf with File → Open Project. The arrangement, brims and overrides are already in it. Confirm it loaded as described rather than rebuilding it.

check Check

Brim outline shows on all three in the preview.

helperHelper Counts the parts on the sorting diagram and checks the total against the object count.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B08.11.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim

← PreviousStep B08.3 — Print plate B08-P1

Next →Step B08.5 — Print plate B08-P2