Batch B104 / 6
Step B10.4 — Print¶
Step 4 of 6 · Batch B10 — Clicky-Clack door
(no image — see text)
Do: Print with standing overrides.
Check
The four hinge-sleeve/solid parts print upright and stable through their full 55–58 mm height; watch the first 10 mm for any brim lift.
Tip
Paused or stopped mid-plate? See When the printer stops.
Good stopping point · ~5 min since the last one
plate started; nothing to do until it finishes.
Source: 00-slicer-setup § Overrides · print plan §4.1 — how these numbers were produced