Step 00.2 — Find the kit serial and open your batch BOM page¶
Step 2 of 32 with a helper · Chapter 00 — Before you start
(no image — see text)
Parts: none.
Do:
- The serial reads
V2-YYMMDD####: batch, pack date, four-digit kit number. - Open 350_BOM/HOME and open the batch tile whose
Kit#:range contains your serial. - Print it or open it on the iPad: this is your inventory checklist.
Check
The page you land on is headed V2.4 350 BOM (Rev. D); every Rev D batch tile from 2406 onward resolves to that one page, as expected.
Helper Reads the serial off the carton label and finds the batch tile that holds it.
What you're looking at
The printed label on carton 1. Its serial ties your kit to the right batch BOM, LDO's per-batch bill of materials and the inventory checklist for the next two steps. Quantities and substitutions change between batches, so the generic page is no stand-in.
Caution
Rev D+ / LDO: the index tops out at batch 2606. A November/December 2026 kit will be a batch LDO has not listed yet. If your serial is not in any tile, use the Rev_D page above and ask Fabreeko for your batch sheet — do not assume quantities from an older batch. src
Source: LDO batch BOM index · LDO 350 Rev D BOM