Step 00.24 — File naming, and where to get help (p.5–6)¶
Step 24 of 32 pre-kit · Chapter 00 — Before you start
Parts: none.
Do:
- Learn the filename convention: a bare name is primary colour, Galaxy Black; an
[a]_prefix is accent colour, ASA Blue; a_x#suffix is the quantity needed. - Bookmark p.5–6's two help routes: Voron Discord, CAD on GitHub.
Check
You can read [a]_z_belt_clip_lower_x4.stl as "accent colour, four required".
What you're looking at
Manual p.5–6, the STL filename convention and the two support routes. A prefix in square brackets sets the colour and a _xN suffix is how many the machine needs. The print plan and every parts table here use that convention.
Source: Voron manual p.5 · Voron manual p.6 · print plan