Ch 052 / 48
Step 05.2 — Name the gantry parts¶
Step 2 of 48 with a helper · Chapter 05 — Gantry: X and Y axes, XY joints, X carriage, titanium backers
Tap to enlarge
Parts: none.
Do: Learn the names: B Drive rear left, A Drive rear right, XY Bridge, both XY Joints, X Linear Rail, B Idler front left, A Idler front right. Check the Ch 04 A and B labels.
Check
You can point at the A drive, the B idler and the right XY joint without hesitating.
Helper Points to each gantry part as you name it and repeats the name back.
What you're looking at
The same rectangle, now labelled. A and B are the two CoreXY motors; neither one "is" an axis. The XY bridge holds the drives apart, the XY joints cap the ends of the X beam, and the front idlers turn each belt back.
Source: Voron manual p.83