Step 06b.7 — Confirm access to the Z and XY joints (the side panels are not on yet)¶
Step 33 of 42 · Chapter 06 — Z axis (and Chapter 06b — Gantry squaring)
Parts: none.
Do: Your side, back and top panels are not on yet, so there is nothing to remove. Confirm that all four Z joints and both XY joints are reachable with a hex key, top and bottom. Voron step 6.
Check
Clear access to all four Z joints and both XY joints.
What you're looking at
Voron's step 6 is written for a finished, panelled machine and takes the two side panels off purely for access. The render shows the side panels, and behind them the four Z joints in the corners and the two XY joints on the gantry.
Source: Voron docs § V2 Gantry Squaring, step 6 · CAD: Voron 2.4r2 STEP @ de7e89d