Step 10.57 — The USB adapter cover is the partial cover¶
Step 57 of 80 · Chapter 10 — Wiring and Checkpoint #1
Parts:
- the fitted
usb_adapter_mount_partial_cover· already on the bench
Do: Confirm the cover on the USB adapter PCB is the V2 partial cover, which deliberately leaves one mounting point exposed. The printed-parts guide still points at the V1 usb_adapter_mount.stl / cw2_captive_pcb_cover.stl; that cover encloses the point you need.
Check
One mounting hole on the USB adapter PCB is uncovered. A fully enclosed cover is the V1 part; reprint from the V2 repo.
What you're looking at
The printed cover clips over the USB adapter PCB in the bay. The V2 version deliberately leaves one mounting hole open so a grounding wire can be bolted to it; the V1 cover encloses that hole.
Caution
Rev D+ / LDO: "A newly designed cover exposes one of the mounting points to connect a grounding point." src — survey §4.1 ⑤
Source: Nitehawk-SB-V2 repo usb_adapter_gnd.jpg · Nitehawk-SB V2 doc § Printed parts
