Step 11.19 — Fit the bestagon insert (optional)¶
Step 20 of 67 with a helper · Chapter 11 — Skirts, panels, Clicky-Clack door, filtration
(no image — see LDO STLs README)
Parts:
-
ldo_bestagon_insert×1 · bin 11-skirts
Do: Push the insert into one of the skirt hexagons from the outside until it snaps. Pick a hexagon on the front-left or front-right skirt where it reads without competing with the touchscreen.
Check
Insert flush and retained; the hexagon is not stressed white at the corners.
Helper Picks the hexagon and pushes the insert in until it clicks.
What you're looking at
The bestagon insert is a purely cosmetic blue plug that snaps into one of the hexagonal openings in a skirt segment. Nothing depends on it.
Source: LDOVoron2 STLs/