Step 11.28 — Heat-set the Nevermore parts¶
Step 29 of 67 · Chapter 11 — Skirts, panels, Clicky-Clack door, filtration
(no image — see LDO Nevermore guide § Preparation)
Parts:
- M3×5×4 heat-set insert ×6 · Fasteners, Tools & Misc box
- the plenum and the cartridge · already on the bench
Do: Four inserts go into the fan mounting holes, one into the plenum, one into the cartridge. Six total.
Check
All six flush and square; an M3 screw starts freely in each.
What you're looking at
Six inserts, three destinations: four in the fan mounting holes, one in the plenum for its lid screw, one in the cartridge for its lid screw. Nothing else on the Nevermore takes a threaded fastener.
Source: LDO Nevermore V5 Duo guide § Preparation · Video: Extras! @2:24:31