Step 11.39 — Attach the cartridge¶
Step 40 of 67 · Chapter 11 — Skirts, panels, Clicky-Clack door, filtration
(no image — see LDO Nevermore guide § Installation for Voron V2.4)
Parts:
- the cartridge · already on the bench
Do: Slide the cartridge along until the magnets take, and let it pull itself home.
Check
Cartridge seated square on the plenum with no gap at the joint; it comes off with a deliberate pull and not with an accidental knock.
What you're looking at
Nothing but magnets holds the cartridge on. That is the point: carbon is consumable, and this joint is the one you will open every few hundred hours.
Source: LDO Nevermore V5 Duo guide § Installation for Voron V2.4