Step 14.26 — Print the exhaust parts on the Core One+¶
Step 26 of 36 with a helper · Chapter 14 — Calibration and tuning
Parts:
- Galaxy Black ASA, about 70 g · consumable
- blue accent ASA, about 35 g · consumable
- the Core One+ with the smooth sheet · tool
Do:
- Run
python3 slicer/fetch_stls.pyso the add-on's files are on disk. - In PrusaSlicer 2.9.6, print the housing with
voron-coreone-asa.ini, as oriented, no supports. - Then print the other three, mounts twice, with
voron-accent-blue.ini. Once cool, bag all five in bin14-exhaust.
Check
The black job slices to about 5 h and 66 g, the blue one to about 2 h and 35 g, both without supports.
Helper Ticks each file on the bed against the list in the add-on folder.
What you're looking at
Four stock Voron parts, printed as two jobs outside the plate run: the housing in black, then the fan grill, the access cover and two mounts in the blue accent, as their [a]_ prefix asks.
ASA
set Chamber Filtration to Adv. Filtration before each job, as for every ASA plate.
Good stopping point · ~35 min since the last one
the back of the machine inspected and the calculator passed, the Step 00.8 row ordered, and the housing printing on the Core One+, about 5 h, with the blue job, about 2 h, after it. Nothing on the Voron has changed.
Source: print/README.md § Add-on prints · slicer/addons/exhaust-voron2/README.md · Voron-2 STLs/Exhaust_Filter/