Skip to content
Batch B021 / 9

Step B02.1 — Filament prep

Step 1 of 9 · Batch B02 — Accent parts (blue)

(no image — see text)

gather Gather for this segment — steps B02.1–B02.3 (~5 min)

Printed parts

  • [a]_stealthburner_main_body — from bin 08-SB
  • [a]_faceplate — from bin 10-tft
  • [a]_cable_cover — from bin 07-X
  • [a]_z_drive_baseplate_a ×2 — from bin 02-Z0, 02-Z2
  • [a]_z_drive_baseplate_b — 7.0 h, 90 g (PrusaSlicer 2.9.6 estimate) ×2 — from bin 02-Z1, 02-Z3

Do:

  1. On the printer, Unload, then Load Filament → ASA, and mount the Prusament ASA Blue spool.
  2. Purge fully: this is the build's one accent session.
  3. Prepare the sheet per 00-slicer-setup § Print sheet.

check Check

Purge line is clean blue with no black streaking.

Source: print plan §4.3 — spool changes · 00-slicer-setup § Drying · Prusa KB — ASA

← PreviousBatch B02 — before you start

Next →Step B02.2 — Load plate B02-P1