Skip to content
Batch B022 / 9

Step B02.2 — Load plate B02-P1

Step 2 of 9 with a helper · Batch B02 — Accent parts (blue)

Parts:

  • [a]_stealthburner_main_body
  • [a]_faceplate
  • [a]_cable_cover
  • [a]_z_drive_baseplate_a ×2
  • [a]_z_drive_baseplate_b ×2 — 7.0 h, 90 g (PrusaSlicer 2.9.6 estimate)

Do:

  1. Open slicer/plates/B02-P1.3mf with File → Open Project. Do not rebuild the plate.
  2. Confirm: filament box Prusament ASA @COREONE HF0.4 - Voron blue, 5 files, 7 objects, no rotation, no brim.
  3. Leave the SB main body's built-in supports; never suppress them.

check Check

SB main body oriented as shipped with its supports visible in preview, and no brim outline anywhere on the plate.

helperHelper Reads the sorting diagram legend aloud and counts the parts on it while you load.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B02.9.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · Stealthburner manual — remove built-in supports

← PreviousStep B02.1 — Filament prep

Next →Step B02.3 — Print plate B02-P1