Batch B032 / 5
Step B03.2 — Load plate B03-P1 (both sides)¶
Step 2 of 5 with a helper · Batch B03 — A/B drive units + front idlers
Parts:
- 8 objects — 8.5 h, 119 g (PrusaSlicer 2.9.6 estimate)
-
a_drive_frame_lower -
a_drive_frame_upper -
front_idler_right_lower -
front_idler_right_upper -
b_drive_frame_lower -
b_drive_frame_upper -
front_idler_left_lower -
front_idler_left_upper
Do: Open slicer/plates/B03-P1.3mf with File → Open Project. Arrangement, per-object brims and overrides ship in the project; confirm what loaded, don't rebuild it. No rotation, no brim in the project.
Check
Parts sit flat as shipped; no brim outline in the preview.
Helper Reads the sorting diagram legend aloud and counts the parts on it while you load.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B03.5.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim