Step B04.6 — Sort into bins¶
Step 6 of 6 with a helper · Batch B04 — XY joints + X carriage
(no image — see text)
Do: Sort off the plate diagram: number to legend, colour to bin, bin id on the part. Mark plate id and date on a hidden face. Labels: bin-labels sheet. Keep probe_retainer_bracket loose until the Omron barrel diameter is confirmed.
Check
05-XY: four joint halves plus the pod and bridges; 07-X: two frame halves and the bracket.
Helper Reads each bin label aloud and checks the count against the diagram.
B04-P1
| bin | parts off this plate |
|---|---|
| 05-XY — XY joints, endstop pod, upper Z belt clips | xy_joint_left_lower_MGN12, xy_joint_left_upper_MGN12, xy_joint_right_lower_MGN12, xy_joint_right_upper_MGN12 |
| 07-X — X carriage halves, probe bracket, cable cover | x_frame_V2TR_MGN12_left, x_frame_V2TR_MGN12_right, probe_retainer_bracket |
Good stopping point · ~10 min since the last one
the plate sorted into 05-XY and 07-X, bin ids on the parts. probe_retainer_bracket stays loose until the Omron barrel is measured; no inserts set.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins