Step B06.2 — Load plate B06-P1¶
Step 2 of 5 with a helper · Batch B06 — Toolhead: Stealthburner, Clockwork 2, Klicky
Parts:
- 18 files, 19 objects, no brim in the project — 12.1 h, 148 g (PrusaSlicer 2.9.6 estimate)
-
stealthburner_printhead_revo_voron_front -
stealthburner_printhead_revo_voron_rear_cw2 -
[o]_stealthburner_LED_carrier -
[o]_stealthburner_LED_diffuser_mask -
main_body(CW2) -
motor_plate(CW2) -
cw2_captive_pcb_cover - then the Klicky set —
KlickyProbe_v2×2 -
Probe_Dock_v2.1 -
Probe_magnet_holder -
Probe_magnet_pressfit_helper -
Probe_pressfit_holder -
KlickyProbe_AB_mount_v2 -
KlickyProbe_AB_mount_v2_holder -
Mount_magnet_holder -
Mount_magnet_pressfit_helper -
Mount_pressfit_holder_v2 -
Dock_mount_fixed_v2
Do: Open slicer/plates/B06-P1.3mf with File → Open Project. Do not rebuild the arrangement.
Confirm the loaded objects match the Parts list and that the printhead files came from the revo_voron
folder.
Check
Printhead files confirmed from revo_voron/; the dock is the fixed variant; no brim outline in the preview.
Helper Reads the sorting diagram legend aloud and counts the parts on it while you load.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B06.5.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · Stealthburner printhead README