Batch B063 / 5
Step B06.3 — Print plate B06-P1¶
Step 3 of 5 · Batch B06 — Toolhead: Stealthburner, Clockwork 2, Klicky
(no image — see text)
Do: Print with standing overrides.
Check
Before start, Settings → Chamber Filtration reads Adv. Filtration. LED carrier, diffuser mask and magnet-holder pockets print crisp, the finest features on the plate.
Tip
Paused or stopped mid-plate? See When the printer stops.
Good stopping point · ~5 min since the last one
plate started; nothing to do until it finishes.
Source: 00-slicer-setup § Overrides · print plan §4.1 — how these numbers were produced