Batch B064 / 5

Step B06.4 — Inspect

Step 4 of 5 · Batch B06 — Toolhead: Stealthburner, Clockwork 2, Klicky

(no image — see text)

Do:

1. Now: caliper the hotend seat in the printhead front, a 20.0 mm bore (verify on bench).
2. Now: count the 12 Klicky pieces and bag them unbuilt, labelled KLICKY — alternative probe only.
3. Kit day: sit the real Revo heatsink in it.

Check

Seat reads 20.0 mm ±0.15 and the Klicky bag is closed with 12 pieces, labelled.

Good stopping point · ~10 min since the last one

seat calipered, Klicky bag closed. Nothing pressed, no magnets, and the real heatsink is a kit-day row.

Source: print plan §5.2 — checkpoint after each batch · Ch 08 Step 08.54 — bag the Klicky set · Klicky — what to print

← PreviousStep B06.3 — Print plate B06-P1

Next →Step B06.5 — Sort into bins