Batch B065 / 5
Step B06.5 — Sort into bins¶
Step 5 of 5 with a helper · Batch B06 — Toolhead: Stealthburner, Clockwork 2, Klicky
(no image — see text)
Do:
- Sort the plate off its diagram: number to legend, colour to bin.
- Mark plate id and date on a hidden face, then print labels from the bin-labels sheet.
- The Klicky bag goes into spare-alt closed.
Check
All toolhead parts in 08-SB / 08-CW2; the Klicky bag closed in spare-alt.
Helper Writes the bin id and the date on the inside face of each part.
B06-P1
| bin | parts off this plate |
|---|---|
| 08-SB — Stealthburner body, printhead, LEDs | stealthburner_printhead_revo_voron_front, stealthburner_printhead_revo_voron_rear_cw2, [o]_stealthburner_LED_carrier, [o]_stealthburner_LED_diffuser_mask |
| 08-CW2 — Clockwork 2 extruder, toolboard + USB covers | main_body, motor_plate, cw2_captive_pcb_cover |
| spare-alt — Spares / alternates (not fitted) | KlickyProbe_v2 ×2, Probe_Dock_v2.1, Probe_magnet_holder, Probe_magnet_pressfit_helper, Probe_pressfit_holder, KlickyProbe_AB_mount_v2, KlickyProbe_AB_mount_v2_holder, Mount_magnet_holder, Mount_magnet_pressfit_helper, Mount_pressfit_holder_v2, Dock_mount_fixed_v2 |
Good stopping point · ~10 min since the last one
toolhead parts in 08-SB and 08-CW2, the closed Klicky bag in spare-alt. No magnets pressed, no hotend fitted.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins