Checkpoint B06¶

Checkpoint · Batch B06 — Toolhead: Stealthburner, Clockwork 2, Klicky

Gate B (bore + inserts) passed before B06-P1 started
Hotend seat in stealthburner_printhead_revo_voron_front calipers 20.0 mm ±0.15
(kit day) Revo Voron heatsink sits flat in that seat, ready for 4× M3×8
Klicky set counted (12 pieces incl. the spare KlickyProbe_v2), bagged in spare-alt, labelled "alternative probe only — Ch 08.54", no magnets pressed

Revali passing a gate — Batch B06 printed: plate 10 of 22, 84.3 of 157.0 h. 1 gummy worm.

Common mistakes¶

Slicing the wrong hotend printhead folder (not revo_voron).
Building Klicky because the parts are on the bench — the kit's config, wiring and pre-terminated cable are all for the inductive probe (Ch 08.54).

Next¶

Assembly: Stealthburner (p.146–147, then the separate Stealthburner manual) — months from now, when the kit lands; the Klicky bag and the SB parts go into bins 08-SB, 08-CW2 and spare-alt today. Printing: B07 — Electronics bay + lighting, then B08–B10.

← PreviousStep B06.5 — Sort into bins

Next →Batch B07 — before you start