Skip to content
Batch B072 / 7

Step B07.2 — Load plate B07-P1

Step 2 of 7 with a helper · Batch B07 — Electronics bay + lighting

Parts:

  • wago_221-415_mount_3by5
  • lrs_200_psu_bracket_x2 ×2
  • PSU_stabilizer_50mm
  • usb_adapter_mount
  • usb_adapter_mount_partial_cover ×1 (ground-lug mount, est.)
  • pcb_din_clip_x3 ×3
  • handlebar_spacer_x4 ×4
  • power_inlet_IECGS_1mm
  • 8 files, 14 objects — 7.9 h, 102 g (PrusaSlicer 2.9.6 estimate)
  • 3 mm brim on wago_221-415_mount_3by5 and power_inlet_IECGS_1mm (the long-flat list), already in the project

Do: Open slicer/plates/B07-P1.3mf with File → Open Project. The arrangement, brims and overrides are already in it. Confirm it loaded as described rather than rebuilding it.

check Check

No face re-orientation, all flat as shipped; the preview shows a brim outline on the Wago mount and the inlet.

helperHelper Counts the parts on the sorting diagram and checks the total against the object count.

What you're looking at

Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B07.7.

Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · LDO Build Notes / FAQ

← PreviousStep B07.1 — Filament prep

Next →Step B07.3 — Print plate B07-P1