Step B07.7 — Sort into bins¶
Step 7 of 7 with a helper · Batch B07 — Electronics bay + lighting
(no image — see text)
Do: Sort off each plate diagram; the printed bin id names the bin. Mark plate id and date on a hidden face. Labels: bin-labels sheet. The inlet lives in 09-bay, only borrowed for the skirt-ring dry-fit at Step 11.1.
Check
COB mounts counted, six 100 mm and two 50 mm, in 10-lights; power_inlet_IECGS_1mm in 09-bay.
Helper Reads each bin label aloud and checks the count against the diagram.
B07-P1
| bin | parts off this plate |
|---|---|
| 08-CW2 — Clockwork 2 extruder, toolboard + USB covers | usb_adapter_mount_partial_cover |
| 09-bay — Electronics bay: inlet, WAGO, PSU, DIN clips | wago_221-415_mount_3by5, lrs_200_psu_bracket ×2, PSU_stabilizer_50mm, pcb_din_clip ×3, power_inlet_IECGS_1mm |
| 11-finish — Exhaust cover + grill, handlebar spacers | handlebar_spacer ×4 |
| spare-alt — Spares / alternates (not fitted) | usb_adapter_mount |
B07-P2
| bin | parts off this plate |
|---|---|
| 10-lights — COB light-strip mounts | cob_light_strip_mount_100mm ×6, cob_light_strip_mount_50mm ×2 |
Good stopping point · ~10 min since the last one
both plates sorted into 08-CW2, 09-bay, 10-lights and 11-finish, the spare usb_adapter_mount in spare-alt. No heat-set inserts yet; Ch 09 sets them on kit day.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins