Step B08.11 — Sort into bins¶
Step 11 of 11 with a helper · Batch B08 — Skirts and front modules
(no image — see text)
Do: Sort off each plate diagram; the printed bin id names the bin. Mark plate id and date on a hidden face. Labels: bin-labels sheet. Every plate feeds 11-skirts beside B02's [a]_faceplate and inserts. Stack by ring position: front, rear, left, right.
Check
All ten structural segments in 11-skirts, stacked by ring position; the TFT mount in 10-tft; B02's grills, retainers and belt guards wait in 11-fans.
Helper Matches each part's number to the diagram legend and drops it in its bin.
B08-P1
| bin | parts off this plate |
|---|---|
| 11-skirts — Skirt ring, keystone panel and inserts | rear_center_skirt_350, side_fan_support |
B08-P2
| bin | parts off this plate |
|---|---|
| 11-skirts — Skirt ring, keystone panel and inserts | front_skirt_a_350, front_skirt_b_350, side_skirt_a_350 |
B08-P3
| bin | parts off this plate |
|---|---|
| 10-tft — Touchscreen faceplate + mount | mount |
| 11-skirts — Skirt ring, keystone panel and inserts | side_fan_support, side_skirt_a_350, side_skirt_b_350 |
B08-P4
| bin | parts off this plate |
|---|---|
| 11-skirts — Skirt ring, keystone panel and inserts | side_skirt_b_350, keystone_panel |
Good stopping point · ~15 min since the last one
every skirt segment in 11-skirts, stacked by ring position, brims off and ids written. The ring is apart, nothing bolted.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins