Step B08.2 — Load plate B08-P1¶
Step 2 of 11 with a helper · Batch B08 — Skirts and front modules
Parts:
-
rear_center_skirt_350 -
side_fan_support×1 — 6.3 h, 99 g (PrusaSlicer 2.9.6 estimate) - 3 mm brim on both, already in the project
Do: Open slicer/plates/B08-P1.3mf with File → Open Project. The arrangement, brims and overrides
are already in it. Confirm the rear skirt is turned 90° about Z, its 182 mm axis running front-to-back along
Y, beside an unturned side_fan_support.
Check
Both parts flat on their shipped faces, long axes front-to-back, brim outline on both in the preview, plate matching the image above.
Helper Reads the sorting diagram legend aloud and counts the parts on it while you load.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B08.11.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · print plan §5.1 — orientation and brim