Batch B087 / 11
Step B08.7 — Print plate B08-P3¶
Step 7 of 11 · Batch B08 — Skirts and front modules
(no image — see text)
Do: Print with standing overrides.
Check
No corner lift on the skirts, no warp on the tall narrow TFT mount.
Tip
Paused or stopped mid-plate? See When the printer stops.
Good stopping point · ~5 min since the last one
plate started; nothing to do until it finishes.
Source: 00-slicer-setup § Overrides · print plan §4.1 — how these numbers were produced