Step B09.2 — Load plate B09-P1¶
Step 2 of 13 with a helper · Batch B09 — Panels, filtration, spool
Parts:
-
V2_Duo_Plenum, 3 mm brim already in the project -
V2_Duo_Plenum_LID, no brim -
Regular_Cartridge_Lid, no brim — 4.5 h, 63 g (PrusaSlicer 2.9.6 estimate)
Do: Open slicer/plates/B09-P1.3mf with File → Open Project. The arrangement, brims and overrides
are already in it. Leave V2_Duo_Plenum's built-in support in place.
Check
Plenum's built-in support visible in preview, not suppressed; brim outline on the plenum only.
Helper Counts the parts on the sorting diagram and checks the total against the object count.
What you're looking at
Sorting diagram, drawn from the committed project: every part numbered and filled in the colour of its bin, bin id on the part; the legend reads # · STL · bin (chapter · steps). Sort at Step B09.13.
Source: print plan §3 — the batches · 00-slicer-setup § Committed projects · 00-slicer-setup § Orientation & brim · Nevermore Micro README · LDO Nevermore V5 Duo guide