Batch B093 / 13
Step B09.3 — Print plate B09-P1¶
Step 3 of 13 · Batch B09 — Panels, filtration, spool
(no image — see text)
Do: Print with standing overrides.
Check
Before start, Settings → Chamber Filtration reads Adv. Filtration. Plenum lid groove prints crisp.
Tip
Paused or stopped mid-plate? See When the printer stops.
Good stopping point · ~5 min since the last one
plate started; nothing to do until it finishes.
Source: 00-slicer-setup § Overrides · print plan §4.1 — how these numbers were produced