Step B10.6 — Sort into bins¶
Step 6 of 6 with a helper · Batch B10 — Clicky-Clack door
(no image — see text)
Do: Sort off the plate diagram: number to legend, colour to bin, bin id on the part. Mark plate id and date on a hidden face. Labels: bin-labels sheet. The six black parts join the blue Handle in 11-door.
Check
All seven Clicky-Clack parts in 11-door: 6 black plus the blue Handle from B02.
Helper Reads each bin label aloud and checks the count against the diagram.
B10-P1
| bin | parts off this plate |
|---|---|
| 11-door — Clicky-Clack door | Handle-Hinge_Bottom, Handle-Hinge_Top, Hinge-L-sleeve-2X ×2, Hinge-L-solid-2X ×2, Latch, Panel_Clip |
Good stopping point · ~10 min since the last one
the last plate of the run sorted into 11-door beside B02's Handle. Every ASA bin is now full and the printer is free for B11; the bushing and pin tests wait for the kit.
Source: print plan §9 — batch summary · print plan §2 — which parts gate which step · print/README § Bins