Batch B11 › Before kit7 / 14

Step B11.7 — Inspect the before-kit plates

Step 7 of 14 · Batch B11 — Bay ducting (PETG V0)

(no image — see text)

Do: Snap every lid onto its duct once. Check each tine row for strings and each base for elephant foot.

Check

Every lid seats along its full length; no tine is fused to its neighbour; bases are flat.

Good stopping point · ~10 min since the last one

before-kit parts inspected and bagged by plate.

Source: print plan §5.2 — checkpoint after each batch

← PreviousStep B11.6 — Load and print plate B11-P3

Next →Step B11.8 — Sort into bins